3 Ways to Protect Cat6 Plenum 1000ft Cable


Cat6 plenum 1000ft cable has now become synonymous with ethernet LAN networks. It comes with a plenum jacket that protects it from harsh weather. But this jacket is not always enough. So occasionally, you would have a damaged Cat6 plenum ethernet that would need to be changed or repaired.

Fortunately, there are ways in which you can protect your Cat 6 ethernet cable. These techniques are not exactly some high-tech safety measures but they are highly functional. And they are easy to implement.

Keep reading to find out the 3 easy ways to protect your Cat6 Plenum 1000ft Cable.

Why Cat6 Plenum 1000ft

If you have used the Cat6 Plenum Cable Bulk, you would be aware of its high performance and ease of use. But for the sake of context, let’s describe it briefly.

This cable has a maximum throughput of 1 GBit.s over 100 meters. And any LAN networking expert would vouch for the idea that this is quite a good speed.

Moreover, the interference levels and external noise are also a bare minimum in this cable. All this comes at an extremely reasonable price. Between $150 to $250, you can purchase the 1000ft Cat6 plenum Cable.

Another important reason you would want to buy this cable is its PoE supportability. It comes with bare copper conductors which are ideal for power over ethernet. And it is needless to say how important and in fact common Power over Ethernet is. From Smart TVs to CCTV cameras, it is used everywhere.

So that should probably sum up the need for a Cat6 plenum.

But if you are reading this, you probably already own the cable. And what you really need is to know how to protect it.

Types of protection

Well, you can protect your Cat6 cable from two different types of adversaries. First, it is the weather and the environmental conditions. And second is electromagnetic interference.

Protection against EMI

To protect your cable against EMI, you simply need to use shielded cables. These cables have built-in mechanisms to fend off any incoming or outgoing interference. This is the best way to protect your cable.

On the other hand, if you have bought the cable already or if you have it installed, you can go ahead with this next tip.

Avoid running too many cables close to each other in parallel directions. This will reduce the effect of EMI induced in one another. Moreover, if you are running the cables along electrical lines, it is not the best idea. So, always avoid running networking cables along with electrical cables.

Protection against environmental conditions

To protect your ethernet cable from harsh environmental conditions, you can use three methods.

First, you need to insulate the cable. You can use any insulation that protects the cable from overheating or overcooling. The best way to do this is to simply run the normal insulations over the cable.

Secondly, while installing, be sure not to bend it more than its recommended angle. There is a specific bend angle for every ethernet cable. And while they may be quite durable, they can suffer damage when put under more than designed impact.

Thirdly, you need to be aware of the installation and use temperatures of the cable. The install temperature of Cat6 plenum 1000ft is between -10℃ to 60℃. Meaning that if you install it within this temperature range, it will be perfectly okay. But beyond that, you might experience trouble while running it.

3 Ways to Protect the Cable

Now, let us discuss the three ways to protect the Cat6 plenum ethernet cable in detail.

  1. Use Insulation

The most effective and best way to protect your Cat6 plenum 1000ft Cable is to use an extra layer of insulation around it. You can buy an insulation material for almost nothing and it will make sure that your cable remains tip-top.

  1. Install Carefully

Installing the cable with due diligence is also pivotal. If you pull it through tight ducts and tricky spaces recklessly, it might take some damage. Therefore, it is critically important that you install it very carefully.

When running the cable in tight spaces, watch out for any bumps such as nuts, nails, etc which might cut into the cable jacket. Once you install the cable if it has sustained damage it will not last long.

The conductors might get rusty and it will reduce the overall cable’s lifetime.

  1. Watch out for the Temperature

Equally important is the installation temperature. If you are installing the Cat6 plenum 1000ft in – 20 degrees centigrade, it is likely to sustain damage. Because at this temperature, the conductors get stiff. And excessive bending can cause significant damage.

Similarly, at above 60 degrees centigrade, the cable jacket will become vulnerable to damage.

Buy Ethernet Cable Near Me

Where do you buy the Cat6 plenum ethernet cable? That is the most important question. The answer is simple. Just look up, “ethernet cable near me” and you will get countless results.

Check out the reviews and do some research about the vendors you shortlist. Then just go for it. Buy ethernet cables from the ones who you think offer great offers for great cable.


To put it simply, you can enhance the performance and lifetime of your Cat6 plenum 1000ft ethernet cables by a wide margin. All you need to do is to be careful while installing them, use insulation to protect them from extreme temperatures, and also be aware of the installation temperature.

Sophie Brown

Learn More →